It is well known that Swiss luxury watches, such as the Patek Philippe or Vacheron Consantin, are of the highest quality, but many do not know why. Swiss watches are of the highest quality due to the strict rules established by the Geneva stamp, high-quality prints made on luxury watches made in Geneva, which can only be used when the watches are built with the requirements established by the statue.
If you are not familiar with the Geneva Seal, here are some facts that will help shed light on this topic. The Geneva Seal is considered a high-ranking watch industry and has existed since 1886. There are two sections of legislation concerning the Geneva press. The first law on voluntary verification of watches from Geneva, and the second - the rules of voluntary inspection of watches from Geneva. They set the criteria for awarding print.
For luxury watches to be considered for the Geneva press, it must meet stringent requirements. The technical requirements relate only to the presentation requirements that must be fulfilled. Here is a list of specifications that make luxury watches available for quality Geneva printing.
1) Good workmanship of all parts of the caliber must meet the requirements of the voluntary watch office from Geneva. Steel parts on luxury watches should have polished corners and their visible surfaces smoothed. Screw heads must be polished and their grooves and rims beveled.
2) All movement should be established using ruby jewelery placed in polished holes, including a running train and an exit wheel. On the side of the bridge, precious stones should be treated with olive oil with polished shells.
3) Hair tightening should be fixed in a grooved plate with a pin having a rounded collar and cap. Mobile research is also approved for use.
4) Using a restraint system requires divided or fixed indices, with the exception of ultra-thin calibers, where a restraint system is not necessary.
5) Regulatory control systems with a balance with a radius of variable rotation are allowed if they meet the conditions of subparagraph 1 of article 3.
6) The wheels of a running train should be beveled at the top and bottom and have a polished shell. In wheels with a thickness of 0.15 mm or less.
7) In wheel assemblies, the swivel shanks and leaf surfaces of the gear must be polished.
8) The evacuation wheel should be lightweight. It cannot be more than 0.16 mm thick in large calibers and 0.13 mm in calibers up to 18 mm. In addition, its locking surfaces must be polished.
9) The angle covered by the pallet lever should be limited to fixed bank walls, not pins or pins.
10) In accordance with the requirements for compaction allowed 10 protected from impact movements.
11) Wire springs are not permitted.
As if these intense and intranet guidelines were not strict enough, there are dozens of additional verification and testing requirements that a guard order must provide before receiving the Geneva stamp. So the next time someone asks why luxury watches, such as Patek Philippe watches, are considered the best, be sure to fill them in the Geneva press.
